BHXKX - ID7329T106,340 VOC GRAY TOP COAT 37038
- MSDS: BHXKX
- Manufacturer: DEXTER COATINGS
- Product Name: ID7329T106,340 VOC GRAY TOP COAT 37038
- National Stock Number: 8010-01-293-8260
Product Identification
Product ID:ID7329T106,340 VOC GRAY TOP COAT 37038
MSDS Date:04/03/1990
FSC:8010
NIIN:01-293-8260
Kit Part:Y
MSDS Number: BHXKX
Responsible Party
HAYWARD, CA 94544-7120
US
Emergency Phone: 415-471-7171
Info Phone: 415-791-1961 (NIGHT NUMBER)
Preparer: S. MORRIS
Cage: 0HKK2
Contractor
Telephone: 415-791-1961
Cage: 0HKK2
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MAY AFFECT THE FOLLOWING ORGANS:
RESPIRATORY TRACT, LIVER, BLOOD, AND CENTRAL NERVOUS SYSTEM, AND
IRRITATION TO EYES AND SKIN.
Effects of Overexposure:OVEREXPOSURE BY INHALATION MAY CAUSE IRRITATION
OF THE RESPIRATORY TRACT, HEADACHE, DIZZINESS, OR DROWSINESS.
First Aid
First Aid:EYE: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING WATER
FOR AT LEAST 15 MINUTES. SKIN: REMOVE CONTAMINATED CLOTHING AND
WASH SKIN WITH SOAP AND WATER. INHALATION: REMOVE FROM EXPOSURE.
INGESTIO N: DRINK WATER. IF NECESSARY, CONSULT A PHYSICIAN FOR ANY
OF THESE CONDITIONS.
Fire Fighting
Flash Point Method:SCC
Flash Point:34.0F,1.1C
Lower Limits:1.05
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, AVOID
BREATHING VAPORS, VENTILATE AREA, AND REMOVE WITH INERT ABSORBANT
AND NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:DO NOT TAKE INTERNALLY! CONTAINERS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQUID IN
EXCESS OF A FEW INCHES.
Other Precautions:MAKE SURE DRUM IS COMPLETELY EMPTY BEFORE WELDING OR
BRAZING DRUM SHOULD BE INDUSTRIALLY CLEANED PRIOR TO REUSE. DO NOT
FLAME CUT, BRAZE OR WELD WITHOUT A NIOSH APPROVED RESPIRATOR OR
APPROPRIATE VENT ILATION SYSTEM.
Exposure Controls
Respiratory Protection:WHEN LOCAL EXHAUST FAILS TO DILUTE TWA/PEL OF
MATERIAL, USE NIOSH/MSHA APPROVED AIR LINE TYPE RESPIRATORS OR
HOODS FOR ENCLOSED AND CONFINED AREAS. USE AIR PURIFYING
RESPIRATORS FOR OTHER AREAS. SEE F ILE FOR MORE INFORMATION.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST TO KEEP TWA AND LEL BELOW
ACCEPTABLE LIMITS AND REMOVE DECOMPOSITION PRODUCTS.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SAFETY EYEWARE/SPLASH RESISTANT
Work Hygienic Practices:KEEP CONTAINERS CLOSED WHEN NOT IN USE.
Supplemental Safety and Health
SARA 313: METHYL ETHYL KETONE (10%). PROP. 65: BENZENE (.00020%).
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:172 TO 337F
Vapor Pres:MK
Vapor Density:>THAN AIR
Stability
Stability Indicator/Materials to Avoid:YES
HEAT
Stability Condition to Avoid:MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMP TEMP, WELDING
Hazardous Decomposition Products:FUMES MAY CONTAIN CARBON MONOXIDE AND
OXIDES OF NITROGEN. MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMP TEMP/WELDING
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.